Pioneer SC-37 Service Manual page 11

5
QQ
3 7 63 1515 0
[2] Display [2] Display
6 6
SIGNAL indicators SIGNAL indicators
1 1
Light to indicate the currently selected input signal. Light to indicate the currently selected input signal.
AUTO lights when the receiver is set to select the input AUTO lights when the receiver is set to select the input
signal automatically. signal automatically.
2 2 Program format indicators Program format indicators
Light to indicate the channels to which digital signals are being input. Light to indicate the channels to which digital signals are being input.
L/R – Left front/Right front channel L/R – Left front/Right front channel
C – Center channel C – Center channel
SL/SR – Left surround/Right surround channel SL/SR – Left surround/Right surround channel
LFE – Low frequency effects channel (the (( )) indicators light LFE – Low frequency effects channel (the (( )) indicators light
when an LFE signal is being input) when an LFE signal is being input)
XL /XR – Two channels other than the ones above XL /XR – Two channels other than the ones above
XC – Either one channel other than the ones above, the mono XC – Either one channel other than the ones above, the mono
su rround channel or matrix encode flag su rround channel or matrix encode flag
3 3 Digital format indicators Digital format indicators
Light when a signal encoded in the corresponding format is detected. Light when a signal encoded in the corresponding format is detected.
DIGITAL – Lights with Dolby Digital decoding. DIGITAL – Lights with Dolby Digital decoding.
DIGITAL PLUS – Lights with Dolby Digital Plus decoding. DIGITAL PLUS – Lights with Dolby Digital Plus decoding.
TrueHD – Lights with Dolby TrueHD decoding. TrueHD – Lights with Dolby TrueHD decoding.
DTS – Lights with DTS decoding. DTS – Lights with DTS decoding.
TE
L 13942296513
DTS HD – Lights with DTS-HD decoding. DTS HD – Lights with DTS-HD decoding.
96/24 – Lights with DTS 96/24 decoding. 96/24 – Lights with DTS 96/24 decoding.
WMA9 Pro – Lights to indicate that a WMA9 Pro WMA9 Pro – Lights to indicate that a WMA9 Pro
signal is being decoded. signal is being decoded.
DSD PCM – Light during DSD (Direct Stream Digital) DSD PCM – Light during DSD (Direct Stream Digital)
to PCM conversion with SACDs. to PCM conversion with SACDs.
PCM – Lights during playback of PCM signals. PCM – Lights during playback of PCM signals.
MSTR – Lights during playback of DTS-HD Master Audio signals. MSTR – Lights during playback of DTS-HD Master Audio signals.
4 4 MULTI-ZONE MULTI-ZONE
Lights when the MULTI-ZONE feature is active. Lights when the MULTI-ZONE feature is active.
5 5 FULL BAND FULL BAND
SC-37 only: Lights when the Full Band Phase Control is switched on. SC-37 only: Lights when the Full Band Phase Control is switched on.
6 6 Listening mode indicators Listening mode indicators
AUTO SURROUND – Lights when the Auto Surround AUTO SURROUND – Lights when the Auto Surround
feature is switched on. feature is switched on.
ALC – Lights when the ALC (Auto level control) mode is selected. ALC – Lights when the ALC (Auto level control) mode is selected.
STREAM DIRECT – Lights when Direct/Pure Direct is selected. STREAM DIRECT – Lights when Direct/Pure Direct is selected.
ADV.SURROUND – Lights when one of the ADV.SURROUND – Lights when one of the
Advanced Surround modes has been selected. Advanced Surround modes has been selected.
STEREO – Lights when stereo listening is switched on. STEREO – Lights when stereo listening is switched on.
STANDARD – Lights when one of the Standard STANDARD – Lights when one of the Standard
Surround modes is switched on. Surround modes is switched on.
THX – Lights when one of the Home THX modes is selected. THX – Lights when one of the Home THX modes is selected.
www
.
Note Note
1 Full Band Phase Control is only apply to the SC-37. 1 Full Band Phase Control is only apply to the SC-37.
5
http://www.xiaoyu163.com
1 1 2 2 3 3
15 15 16 17 16 17 18 18
x ao
y
i
http://www.xiaoyu163.com
6
8
6 6
4 4 5 5
19 19
7 7 (PHASE CONTROL) (PHASE CONTROL)
Lights when the Phase Control or Full Band Phase Lights when the Phase Control or Full Band Phase
Control Control
8 8 Analog signal indicators Analog signal indicators
Light to indicate reducing the level of an analog signal. Light to indicate reducing the level of an analog signal.
9 9 Tuner indicators Tuner indicators
TUNED – Lights when a broadcast is being received. TUNED – Lights when a broadcast is being received.
STEREO – STEREO –
received in auto stereo mode. received in auto stereo mode.
MONO – Lights when the mono mode is set using. MONO – Lights when the mono mode is set using.
MPX . MPX .
10 SOUND 10 SOUND
Lights when any of the Midnight, Loudness or tone Lights when any of the Midnight, Loudness or tone
controls features is selected. controls features is selected.
Lights when Dialog Enhancement is switched on. Lights when Dialog Enhancement is switched on.
11 11
Q Q
Lights when the sound is muted. Lights when the sound is muted.
3 6 7 1 3
12 Master volume level 12 Master volume level
Shows the overall volume level. Shows the overall volume level.
"---" indicates the minimum level, and " +12dB " indicates "---" indicates the minimum level, and " +12dB " indicates
the maximum level. the maximum level.
13 Input function indicators 13 Input function indicators
Light to indicate the input function you have selected. Light to indicate the input function you have selected.
(HMG only lights for the SC-37.) (HMG only lights for the SC-37.)
14 Scroll indicators 14 Scroll indicators
Light when there are more selectable items when making Light when there are more selectable items when making
the various settings. the various settings.
15 Speaker indicators 15 Speaker indicators
Lights to indicate the current speaker system, A and/or B. Lights to indicate the current speaker system, A and/or B.
16 SLEEP 16 SLEEP
Lights when the receiver is in sleep mode. Lights when the receiver is in sleep mode.
17 Matrix decoding format indicators 17 Matrix decoding format indicators
PRO LOGIC IIx – This lights to indicate PRO LOGIC IIx – This lights to indicate
Logic II / Logic II /
Neo:6 – When one of the Neo:6 modes of the receiver Neo:6 – When one of the Neo:6 modes of the receiver
is on, this lights to indicate Neo:6 processing. is on, this lights to indicate Neo:6 processing.
18 S.RTRV 18 S.RTRV
Lights when the Sound Retriever function is active. Lights when the Sound Retriever function is active.
19 Character display 19 Character display
Displays various system information. Displays various system information.
20 Remote control mode indicator 20 Remote control mode indicator
Lights to indicate the receiver's remote control mode Lights to indicate the receiver's remote control mode
u163
setting. (Not displayed when set to 1.) setting. (Not displayed when set to 1.)
.
SC-37
6
7
2 9 9 4 2 8
7 7 8 8 9 10 9 10 11 11 12 12
1 1
is switched on. is switched on.
Lights when a stereo FM broadcast is being Lights when a stereo FM broadcast is being
1 5 0 5 8 2 9 9 4
Pro Logic IIx decoding. Pro Logic IIx decoding.
m
co
7
8
9 9
13 13 1 1
A
20 20
B
C
2 8 9 9
D
Pro Pro
E
F
11
8