Riello BAG3 MIX FAMILY COND Instructions For The Installer And For Technical Assistance page 33

2. Connect the bipolar black cable with prods to the boiler's M2 board (fig. 6).
Boilers from inside
Fig. 6
3. Connect the probe wiring and thermostat to CN6 connector of BE08
Connect the prods to the M10 boiler board (fig. 7).
Connect the shielded cable connector (on the
thermostat.
Fig. 7
Connection to the
BAG 3 MIX sensor
BAG
Boilers from inside
Boilers from outside
MIX FAMILY COND
3 part) to the NTC probe and the other to the
Boilers from outside
Connection to the
BAG MIX sensor
3
33