Riello BAG3 AP Instructions For The Installer And For Technical Assistance page 27

Table of Contents

Advertisement

Available languages

Available languages

To install BAG
3
inside the box, proceed as follows:
− Insert the right side of the BAG
tate the left side until the BAG
sure that the insulator covering the mixing bottle is not
damaged
− Insert the hook (2) of the mixing bottle and attach to the
hook (3) on the back of the box
− Position the system delivery and return pipes into the
seats positioned on the rack (4) making sure that the nuts
(5) are positioned below the rack itself
3
2
4
5
Remove the protective plug (1) on the mixing bottle
− Fit the pipes (6) and (7) on the couplings (6a) and (7a),
located on the mixing bottle and positioning the desig-
nated seals supplied
1
6a
6
7a
7
3
inside the box and ro-
3
enters completely making
− Place the bracket (8) together with the electrical connec-
tion box (9), on the rack (4) and secure it with the desig-
nated screws supplied.
1
6a
6
7a
7
9
The hydraulic module is supplied already wired to the driv-
ers of the module itself. For other connections, please refer
to the wiring diagrams in this document (see "1.9 Wiring di-
agram" on page 23 ).
27
INSTALLATION

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Bag3 2 apBag3 3 ap200822772008228020082282

Table of Contents