Error Codes - Audiovox ACD-22 Owner's Manual

1. Switch the vehicle ignition "on" and the radio "on" (radio frequency or disc track
number will be shown on the display panel).
2. Press and hold the Time/Frequency Display Selector button
2 seconds until the time display appears with the colon ( : ) flashing. Release the
Time/Frequency button.
3. Press the Down Tuning button (
the Up Tuning button (
4. When the correct time is shown on the display panel, release the Time/Frequency
Selector button again or wait 5 seconds for the display to return to the normal
indication.
If a problem should develop while operating the CD player, the following error codes
may be displayed on the display panel:
ER-2: Indicates the disc is not loading properly. Try re-loading or pressing the
Eject button. Check the condition of the disc in use or try another disc.
ER-3: Indicates the disc is not ejecting properly. Try pressing the Eject button
again. Check the condition of the disc in use or try another disc.
ER-4: Indicates an error in the laser reading the disc. Eject the disc, make sure
it is clean, undamaged, and loaded correctly (label side up). Re-load the
disc and check for proper operation or try another disc.
ER-5: Indicates excessive temperature conditions. CD play will resume when
the temperature returns to the normal range.
ER-6: Indicates a mechanism error. Eject the disc and try re-loading. Also try
activating the Re-Set button
ER-7: Indicates an error in the laser reading the disc. Eject the disc, make sure
it is clean, undamaged, and loaded correctly (label side up). Re-load the
disc and check for proper operation or try another disc.
ER-8: Indicates an error in the laser reading the disc. Eject the disc, make sure
it is clean, undamaged, and loaded correctly (label side up). Re-load the
disc and check for proper operation or try another disc.
If the suggested measures do not solve the problem, contact an approved warranty
11 11 11
11 11
station near you for further assistance.
SET T T T T T ING THE CLOCK SET SET ING THE CLOCK ING THE CLOCK ING THE CLOCK
SET SET ING THE CLOCK
) to adjust the hours and the "AM" indicator and
) to adjust the minutes to the correct time.

ERROR CODES

ERROR CODES ERROR CODES
ERROR CODES ERROR CODES
and try again.
approximately