Setting The Clock; Cd Player Error Codes - Audiovox Prestige P-953 Owner's Manual

NOTES ON USE OF REMOTE INPUT JACK:
The remote input jack provides the user option of applying
an external audio source to the radio.The audio jack is
compatible with most "Walkman" CD and cassette
players, or an MP3 digital audio playback unit. When
the external source is connected, only that media is
played by the radio; no other input sources (radio or CD)
are operative.
1. Switch the vehicle ignition and radio "on".
2. Press the Display (T/F) button to call the time display; then press and hold the button until a beep tone occurs and the time
display flashes.
3. While the display is flashing, press the Up TUNE/SEEK/TRACK (
Down TUNE/SEEK/TRACK (
4. Five seconds after the last hour or minute adjustment is made, the time will be set in the unit and the display will return to the
normal indication.
If a problem should develop while operating the CD player, an error code (ER-1, ER-2, ER-3, etc.) may appear on the display
panel. This can indicate a number of problems with the unit, including a mechanical error or an error in the microprocessor control
of the player. If an error code should appear, try ejecting and reloading the disc into the player. While the disc is out of the unit,
make sure it is clean, undamaged, and loaded correctly (label surface up). You may also try activating the RESET button
unit, but this will also erase the time and pre-set memories.
If the suggested measures do not solve the problem, contact an approved warranty station near you for further assistance.
MOUNTING PLATE
GUIDE (2 PLACES)

SETTING THE CLOCK

) button to adjust the minutes to the correct time.

CD PLAYER ERROR CODES

-9-
THEFT DETERRENT
LED (31)
DISC SLOT
(19)
PANEL MOUNT-
ING PLATE
) button to adjust the hours and A or P indication, or the
RESET BUTTON
(32)
CD EJECT
FRONT PANEL
BUTTON (27)
dn
on the