Power Off Button; Bass Control - Audiovox ACD-22 Owner's Manual

POWER OFF BUTTON

Press this button to turn the unit on and off.
When turned on, the volume level will start
at 1 and gradually increase to the level at
which it was set when the unit was turned off.
VOLUME / LEVEL CONTROLS
To increase the volume level, press the
button. The volume will increase and the
level will be shown on the display panel
from a minimum of "V -0" to a maximum of
"V -46". To increase the volume quickly,
keep the button pressed. To decrease the
volume level, press the
button pressed to decrease the volume
quickly. The display will automatically return
to the normal indication 5 seconds after
the last volume adjustment or when another
function is activated. These controls are
also used in conjunction with the Select
button to adjust the bass, treble, balance
and fader levels as described in
and .
5 5 5 5 5
SELECT BUTTON (SEL)
This button is used to select the audio
function (volume, bass, treble, balance or
EQ EQ EQ
EQ EQ
ST
EQ
ROCK
SW LOC DISC LOUD
CLAS
IN DISC RND
POP
TOP SCN
fade) to be adjusted using the Level Control
Pressing the Select button once will set the unit
for volume adjustment ("VOL" will appear on the
display panel). Pressing the button additional
times will select bass adjustment ("BAS" on
display panel), treble adjustment ("TRE"), balance
("BAL"), fader ("FAD"), and volume ("VOL") again.
The display will return to the normal indication
5 seconds after the last adjustment or when
another function is activated.

BASS CONTROL

To adjust the bass level, first select the Bass
button. Keep the
mode by pressing the Select button
"BAS" indication appears on the display panel.
Within 5 seconds of choosing the Bass mode,
press the
to adjust the bass response as desired. The
bass level will be shown on the display panel
from a minimum of "B -6" to a maximum of "B +6"
("B 0" represents flat response). The display
, , ,
will automatically return to the normal indication 5
seconds after the last adjustment or when
another function is activated. When the "EQ"
function is active, the bass level cannot be
changed.
CH
TRACK
SCAN RPT
MODE
RPT
or buttons of the Level Control
.
until the