Setting The Clock; Cd Player Error Codes - Audiovox Prestige P-955 Owner's Manual

Am/fm/mpx radio with fold-down detachable front panel, compact disc player, cd changer controls, wireless remote control and quartz clock

Hide thumbs Also See for Prestige P-955:

Table of Contents

If a problem should develop while operating the CD player, an error code (ER-1, ER-2, ER-3, etc.) may appear on the display

panel. This can indicate a number of problems with the unit, including a mechanical error or an error in the microprocessor

control of the player. If an error code should appear, try ejecting and re-loading the disc into the player. While the disc is out

of the unit, make sure it is clean, undamaged, and loaded correctly (label surface up). You may also try activating the

RESET button

on the unit, but this will also erase the time and pre-set memories.

1. Switch the vehicle ignition and radio "on".

2. Press the Time/Frequency button to access the time display.

3. While holding the Time/Frequency button in, press the Down Tuning (

indication or the Up Tuning (+

4. Five seconds after the last hour or minute adjustment is made, the time will be set in the unit and the display will return to

the normal indication.

SETTING THE CLOCK

) button to adjust the minutes to the correct time.

-10-

-) button to adjust the hours and AM/PM

Table of Contents