Geberit MEDIA 160 Operation Manual page 24

Operation
Press together the parts that are to be welded with
4
the operating lever and check that the parts to be
welded are fixed in place.
Tighten with the adjustable eccentric lever if fixing is
5
not adequate.
24
Planing the pipes or fittings
WARNING
Risk of injury from flying parts
Only switch the electric plane on and off in the
working position and with a workpiece clamped in
place
Wear protective goggles while using the electric
plane
CAUTION
Danger of injury from the high noise level
Wear ear protection while using the electric plane
Connect the electric plane to the power supply
1
system.
Swivel the electric or hand-operated plane between
2
the parts to be welded.
Press the operating lever to the right to lightly press
3
the parts to be welded onto the plane disc on both
sides.
TY P
84
ME DIA
.
H. NR
MA SC
TY P
84
ME DIA
.
H. NR
MA SC