Operations; Connections - LAUNCH TECH CreaderVII User Manual

LAUNCH

4. Operations

4.1 Connections

1 Find the vehicle’'s DLC;
2 Plug the OBD II connector of CreaderVII into DLC;
3 Turn the ignition switch on;
4 CreaderVII automatically enter the start-up screen, as shown on Fig. 4-1.
Notes:
The ignition switch should be off when making connections.
When turning the ignition on or engine is running, do not disconnect or connect any
testing devices to avoid damage to vehicle or devices.
5 Then the system enters the main menu screen, as shown on Fig. 4-2.
Fig. 4-1
CreaderVII English User’' s Manual
Fig. 4-2
10