Product Checking; Installation - Mitsubishi Electric FR-HEL-0.4K Instruction Manual

Product Checking

1
Product Checking
(1) Unpack the option unit, and ensure that the product received is as you
ordered and it is intact.
MODEL
FR-HEL-
SERIAL
MITSUBISHI ELECTRIC CORP.
(2) Make sure that the package includes all accessories.
DC reactor
(FR-HEL)....................... 1
*The terminal cover is provided on the terminal block.
2

Installation

(1) Install the reactor horizontally or vertically according to the environment
conditions specified on page 6. Installing the reactor in an unspecified
direction will damage the rector.
(2) Take full caution not to make the surrounding air temperature higher than
the permissible value (-10°C to +50°C). In addition, as the reactor itself
generates heat, leave sufficient clearance around it. (Independent of the
installation direction of the reactor, 10 cm or more for the above and
below, 5 cm or more for the right and left)
5cm or
more
2
DC REACTOR
XXXXXXXXXXXX
K
FR-HEL- H
Symbol
None
Terminal block cover .......1
(200V class 15K or lower,
400V class 55K or lower)*
10cm or more
5cm or
more
*
* For the 400 V class,
K
Applied motor capacity (kW)
Applied Power Supply Voltage
200V class
H 400V class
Instruction manual ..........1
5cm or
more
is indicated.
5cm or
more