Mitsubishi Electric FR-HEL-0.4K Instruction Manual page 18

4. Additional Instructions
Also note the following points to prevent an
accidental failure, injury, electric shock, etc.
Assumes that incorrect handling may cause
an accidental failure, injury, electric shock,
etc.
1) Transportation and installation
CAUTION
 When carrying products, use correct lifting
gear to prevent injury. Special attention
must be paid to the edges of the product.
 Do not install or operate the option unit if it
is damaged or has parts missing.
 Do not stand or rest heavy objects on the
product.
 Check that the mounting orientation is
correct.
 Prevent other conductive bodies such as
screws and metal fragments or other
flammable substance such as oil from
entering the option.
 As the option is a precision instrument, do
not drop or subject it to impact.
 Use the inverter under the following
environmental conditions. Otherwise, the
inverter may be damaged.
Surrounding
-10°C to 50°C
air
(non-freezing)
temperature
Ambient 90% RH or less
humidity (non-condensing)
Storage
temperature -20°C to 65°C *1
Indoors (free from
Atmosphere corrosive gas, flammable
gas, oil mist, dust and dirt)
Maximum 1000m above sea
Altitude/
level 5.9m/s
vibration
55Hz (directions of X, Y, Z
axes)
*1 Temperature applicable for a short time,
e.g. in transit.
 If halogen-based materials (fluorine,
chlorine, bromine, iodine, etc.) infiltrate into
a Mitsubishi product, the product will be
damaged. Halogen-based materials are
often included in fumigant, which is used to
sterilize or disinfest wooden packages.
When packaging, prevent residual fumigant
components from being infiltrated into
Mitsubishi products, or use an alternative
sterilization or disinfection method (heat
disinfection, etc.) for packaging.
Sterilization of disinfection of wooden
package should also be performed before
packaging the product.
A-2
2) Trial run
3) Operation
4) Disposal
(5) General instruction
2
or less at 10 to
CAUTION
 Before starting operation, confirm and
adjust the parameters. A failure to do so
may cause some machines to make
unexpected motions.
WARNING
 Do not modify the equipment.
 Do not perform parts removal which is not
instructed in this manual. Doing so may
lead to fault or damage of the inverter.
CAUTION
 Treat as industrial waste.
All illustrations given in this manual may
have been drawn with covers or safety
guards removed to
description. Before starting operation of the
product, always return the covers and
guards into original positions as specified
and operate the equipment in accordance
with the manual.
provide in-depth