Specifications; Troubleshooting - IDW G-Series Instruction Manual

Instruction Manual

SPECIFICATIONS

RATED
MODEL VOLUME(L) VOLTAGE
G-26-C334B
G-26-CB334B
G-26-CP334B
G-26-CW334B
G-26-C334B-HC
G-26-CP334B-HC
GCG-26-C334B
GCG-26-CB334B
GCG-26-C2334B
GCG-26-CP334B 22.6ft
3
GCG-26-CW334B
GCG-26-CW2334B
GCG-26-CZ334B
GCG-26-CZ2334B
GCG-26-C334B-HC
GCG-26-C2334B-HC
GCG-26-CP334B-HC
GCG-26-CA334B
GCG-26-CA334B-HC
G-26-C934B
G-26-CB934B
G-26-CP934B
G-26-CW934B
G-26-CZ934B
G-26-C934B-HC
110-120V/60Hz
G-26-CP934B-HC
G-26-CZ934B-HC
G-26-CB934B-HC
G-26-CW934B-HC
GCG-26-C934B
GCG-26-CB934B
GCG-26-C2934B
GCG-26-CP934B
GCG-26-CW934B
GCG-26-CW2934B
22.3ft
3
GCG-26-CZ934B
GCG-26-CZ2934B
GCG-26-CP2934B
GCG-26-C934B-HC
GCG-26-C2934B-HC
GCG-26-CP934B-HC
GCG-26-CP2934B-HC
GCG-26-CW2934B-HC
GCG-26-CB934B-HC
GCG-26-CW934B-HC
GCG-26-CZ934B-HC
GCG-26-CZ2934B-HC
GCG-26-CA934B
GCG-26-CA2934B
GCG-26-CA934B-HC
GCG-26-CA2934B-HC
NSF/ASNI-7: Type II Display Refrigerator A display refrigerator intended for use in an area where the
environmental conditions are controlled and maintained so that the
ambient temperature does not exceed 80°F (27°C).
12
RATED LAMP INPUT
CURRENT POWER REFRIGERANT
13 W
R290/140g
20 W
23 W
13 W
2.7A
R290/83g
20 W
23 W

TROUBLESHOOTING

The following are NOT malfunctions:
Situation Causes
Liquid fl owing noise within cooler • This is the sound of the cooling agent fl owing through the pipes.
Refrigeration system is shutdown for longer periods • This refrigerator is well insulated and can maintain a relatively
of time while temperature inside is still very low ambient temperature.
Condensation on door/lid • This may be due to a high indoor humidity or the cooler's
temperature is set too low. Wipe the door dry with a towel.
1 This refrigerator has been designed and manufactured according to National standards. If there
are any questions during use, refer to this operation manual to help troubleshoot problems.
2 When disposing of the cooler, please remove the door/lid and lock assembly to avoid children
accidentally becoming trapped inside the cooler.
Prior to calling service, check the following:
Issues Solutions
Cooler is not working properly Please check power supply:
• Check the electrical outlet for power, and that the plug is properly inserted.
• Check to see if the circuit breaker is tripped or the fuse is blown.
• Check if the condenser is free of dirt and debris.
• Check for low voltage
Cooler is not keeping product cool • Provide ample space between all products to ensure proper circulation of air.
• Keep unit away from direct sunlight or other heating source.
• Keep the door closed as often as possible.
• Be certain the cooler is not touching external objects or walls.
Excessive noise • Be certain the cooler is placed on a level surface.
• Be certain the cooler is not touching external objects or walls.
Compressor turns on and off frequently
• The room temperature is higher than normal.
• The door is not closed completely.
• The door gasket is not sealed properly.
• There is insuffi cient clearance around the cooler.
• The thermostat is not set properly.
• The frequency of cycling will be reduced when all of the product reaches the
set temperature.
AFTER SALES SERVICE
Any product has the possibility of malfunction. Please observe the cooler's operation and any
changes to product being stored. If there are any abnormal cases, refer to the table below. If there
is still no change after following the below instructions, please inform our service center in a timely
manner to avoid a further loss of the unit.
Information to provide to your qualifi ed service professional:
• Serial number from the interior wall of the
cooler
• Coolers' installation address and contact
information
• Installation location hours and operation
• Nature of problem
• Any reports of power interruptions
Innovative DisplayWorks, Inc.
G-26c/GCG-26c
• Recent service or maintenance completed
on the cooler
• Has the cooler been relocated from original
installation location
• Clear access to the cooler
• Coolers' instruction manual
13