GCG-10 FOR YOUR FUTURE REFERENCE • This easy-to-use manual will guide you in getting the best use of your cooler. • Remember to record the model number and the serial number. This information can be found on the inside of your cooler. •...
Condenser Fan Motor Bracket Left Glass Door Light Cover LED Light Bottom Hinge Condenser Fan Blade Right Glass Door Light Cover Innovative DisplayWorks offi ce 909.447.8254 • fax 909.305.8756 • toll free 877.307.2665 • www.idw.global Last Revised: August 19, 2015 6:28 PM...
Page 5
GCG-10 SAFETY PRECAUTIONS When using this appliance, always follow the basic safety precautions: 1. Read the entire User’s Manual before operating this appliance. 2. Use this appliance only for its intended purpose as described in this User’s Manual. 3. This cooler must be properly installed in accordance with the installation instructions before being used. See grounding instructions on page 6.
Instruction Manual FEATURES • Designed with an elegant shape and quick refrigeration speed, this commercial-grade product is an ideal choice for shopping malls, supermarkets, hotels, etc. • Transparent glass doors are built with hollow, toughened glass that provides a high level of heat insulation. Clear doors allow for high product visibility.
This includes: foam pedestal, adhesive tape (used to fix accessories) and protective gaskets. • Inspect cooler for concealed damage. Immediately file a claim with the freight carrier if there is damage. IDW is not responsible for damage incurred during shipping.
Instruction Manual Replacing the Canopy Light • Updating the removal of the light canopy Unplug the cooler, then unscrew (2) screws using a Phillip’s screwdriver. Remove plastic cover. Disconnect lights. Unscrew (2) screws using a Phillip’s screwdriver. Remove LED light strand. To install LED lights follow the above directions in reverse order.
GCG-10 REPLACING THE DOOR LIGHTS There are LED lights inside the top of the cabinets and in the door. GCG-10 has Interior top canopy lights and inner side door lights. Replacement of LED lights in the door: Unplug the cooler. Remove plastic cover.
Instruction Manual STARTUP, OPERATION AND TEMPERATURE ADJUSTMENT Operation • Prior to stocking cooler with product, it should be operated empty for half an hour. Temperature Adjustment • GCG-10 performance testing position of the thermostat is around 3.5-5. Lit Door “Logo” Switch Operation •...
GCG-10 CONDENSER MAINTENANCE It is essential to keep the condenser coils clean and free of dust and debris at all times. It is required to periodically clean the condenser coils with a soft bristle brush or vacuum-cleaner to properly maintain the refrigeration system. Failure to clean the condenser at regular intervals may cause failure of the refrigeration system and could void the warranty.
Instruction Manual TROUBLESHOOTING The following are not Malfunctions: Issues Solutions Liquid fl owing noise within cooler This liquid is the sound of the cooling agent fl owing through the pipes. Refrigeration system is shutdown for This refrigerator has a strong level of heat preservation and can main- longer periods of time while temperature tain a relatively ambient temperature.
The following is not a malfunction: • It is normal to hear gurgling sounds caused by the fl ow of refrigerant when each cooling cycle ends. GCG-10 REFRIGERANT • The cooler utilizes R134a refrigerant. SPECIFICATIONS Model: GCG-10 Upright Cooler Power Supply (V/Hz): 110V/60Hz Dimension (W x D x H): 25.25”...
Page 14
Innovative DisplayWorks, Inc. To locate the distributor in your area go to: http://www.idw.global/contact/#distributors...