Accessories
4.5 Manual operators
Procedure
1. Press the door interlocking pin with a sharp object.
2. Hold the pin down while the door is opened.
See also
(https://support.industry.siemens.com/cs/ww/en/view/80600132)
Tolerance compensator
Door mounted rotary operators are supplied as standard with a tolerance compensator. This
device compensates any potential minor offset between the rotary switch of the cubicle
doors and the shaft of the door mounted rotary operator.
①
318
Tolerance compensator
3VA molded case circuit breakers with IEC certificate
Manual, 03/2019, A5E03603177010-03