IFM Electronic efector200 OGP50 Series Operating Instructions
IFM Electronic efector200 OGP50 Series Operating Instructions

IFM Electronic efector200 OGP50 Series Operating Instructions

Retro-reflective sensor

Advertisement

Quick Links

Operating instructions
Retro-reflective sensor
UK
UK
OGP50x

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the efector200 OGP50 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for IFM Electronic efector200 OGP50 Series

  • Page 1 Operating instructions Retro-reflective sensor OGP50x...
  • Page 2 1 Functions and features In conjunction with a prismatic reflector or reflective tape the retro-reflective sensor detects objects and materials without contact and indicates their presence by a switching signal. Range 0.03...5 m (on prismatic reflector Ø 80 mm; E20005). 2 Installation ►...
  • Page 3 4 Operating and display elements [OUT off] [OUT on] 4 Settings 4.1 The sensor is to switch when the object is detected ► Position the object. ► Press [OUT on] for 2 s. > The sensitivity is set to the object. >...
  • Page 4 4.3 Programming unsuccessful > LED flashes quickly, 8 Hz. Possible causes • Measured value difference too small. • Max. programming time of 15 min. exceeded. 4.4 Setting of maximum sensitivity ► Align the sensor so that no light is reflected. The sensor is to switch when the object is detected ►...

Table of Contents