Starkey Remote Microphone Plus Quick Start Quide

Remote
Microphone Plus
Pairing
The Remote Microphone Plus must be paired to interact with compatible 2.4 GHz hearing aids on the Thrive platform.
Pairing occurs once, then the hearing aids and Remote Microphone Plus will automatically recognize each other.
1
Power off your smart device or other accessories that were previously paired with your hearing aids.
2
Ensure the Remote Microphone Plus is powered on.
Power off, then power on your hearing aids to place in pairing mode.
3
Place your hearing aids within 6 inches of the Remote Microphone Plus.
4
Press the Input Mode and Volume Up buttons simultaneously for 7 seconds
5
until the LED status indicator alternately blinks blue and red.
6 A green LED will blink for each hearing aid to confirm a successful pairing.
Pairing Remote Microphone Plus to Bluetooth Devices
Power off your smart device or other accessories that were previously paired with your hearing aids.
1
Ensure the Remote Microphone Plus is powered on.
2
Press the Input Mode and Volume Down buttons simultaneously
3
for 7 seconds until the LED status indicator rapidly blinks blue.
4 Put the Bluetooth
5 When the Remote Microphone Plus appears, select it on the Bluetooth device.
6 The Remote Microphone Plus LED will turn green for 2 seconds with successful pairing.
device into pairing mode.
®
Microphones
Input Mode LEDs
FM Receiver Jack
Clip
Multi-Function Button
Input Mode Button
Stream
Volume
Up/Down
MicroUSB Jack
5
Volume +
Input
Mode
3
Volume −
Input
Mode