Table of Contents
Advertisement
3.2.5
Route mode considerations
Depending on the chartplotter used in conjunction with SeaWays; not all
behave the same when initiating a turn while reaching a waypoint.
In addition, the waypoint arrival alarm may behave differently or even be
turned off in the chartplotter.
It is important to understand the functionality of the chartplotter being used:
The CANtrak display has a waypoint arrival alarm that can be toggled on or off.
Figure 3-8.
Figure 3-9.
These arrival alarms pop up automatically when a way point is reached and
a 10° or more course change is required.
The screen disappears when the user presses the OK button or
automatically after 10 seconds. The CANtrak display will provide audible
beep when the screen is displayed.
The vessel will initiate turning regardless if the arrival alarm OK is pressed.
When the screen is up, the green arrow blinks at 2 Hz and the 10 second
timer counts down.
3-5
EN
Advertisement
Table of Contents
