Table of Contents
Advertisement
11 Special Instruction for Use
•
The equipment shall only be used in an area of not more than pollution degree 2, as defined in IEC/EN 60664-1
•
Care shall be taken not to allow layers of dust to form on the graphic panel in a way that might cause the accumu-
lation of static charges. Keep the faceplate of the HMI device clean: the equipment must be cleaned only with a
soft cloth and neutral soap product. Do not use solvents.
•
This device should not be used for purposes and methods other than indicated in this document and in the docu-
mentation accompanying the product.
MANUGENX5 - Version 1.01 24.03.2021
© 2021 0N3 s.r.l. - Subject to change without notice
58
Advertisement
Table of Contents
