International Standards - 0N3 X5 System User Manual

10.2 International standards

Safety of machinery
EN ISO 13849-1:2015
EN ISO 13849-2:2012
EN 61010-1: 2010 + A1:2019
+ AC:2019-04
EN IEC 61010-2-201: 2018
EMC
EN 61000-6-2:2017
EN 61000-6-4:2007+A1:2011
EN 61000-4-2:2009
EN 61000-4-3:2006+A2:2010
EN 61000-4-4:2012
EN 61000-4-5:2006
EN 61000-4-6:2009
EN 61000-4-8:2013
EN 61000-4-29:2000
ETSI EN 300 328 V2.1.1:2016
ETSI EN 301 893 V2.1.1:2017
ETSI EN 300 330 V2.1.1:2017
EN 62311:2008
ETSI EN 301489-1 V2.1.1
ETSI EN301489-17 V3.1.1
EN 55011:2007
MANUGENX5 - Version 1.01 24.03.2021
© 2021 0N3 s.r.l. - Subject to change without notice
Safety of Machinery – Safety related parts of control systems Part 1:
General principles for design
Safety of Machinery – Safety related parts of control systems Part 2: Validation
Safety requirements for electrical equipment for measurement, control, and
laboratory use
Safety requirements for electrical equipment for measurement, control and labora-
tory use - Part 2-201: Particular requirements for control equipment
Electromagnetic Compatibility (EMC) Part 6-2: Generic Standards – Immunity for
Industrial Environments
Electromagnetic Compatibility (EMC) Part 6-4: Generic Standards – Emission
Standard for Industrial Environments
Electromagnetic compatibility (EMC) Part 4-2: Testing and measurement tech-
niques Electrostatic discharge immunity test
Electromagnetic compatibility (EMC) Part 4-3: Testing and measurement tech-
niques Radiated, radio-frequency, electromagnetic field immunity test
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement tech-
niques - Electrical fast transient/burst immunity test
Electromagnetic compatibility (EMC) Part 4-3: Testing and measurement tech-
niques Radiated, radio-frequency, electromagnetic field immunity test
Electromagnetic compatibility (EMC) Part 4-6: Testing and measurement tech-
niques - Immunity to conducted disturbances, induced by radio-frequency fields
Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement tech-
niques Power frequency magnetic field immunity test
Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement tech-
niques - Voltage dips, short interruptions and voltage variations on d.c. input power
port immunity tests
Wideband transmission systems; Data transmission equipment operating in the
2,4 GHz ISM band and using wide band modulation techniques; Harmonised Stand-
ard covering the essential requirements of article 3.2 of Directive 2014/53/EU
5 GHz RLAN; Harmonised Standard covering the essential requirements of article
3.2 of Directive 2014/53/EU
Short Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25
MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Har-
monised Standard covering the essential requirements of article 3.2 of Directive
2014/53/EU
Assessment of electronic and electrical equipment related to human exposure
restrictions for electromagnetic fields (0 Hz - 300 GHz)
Electromagnetic compatibility and Radio spectrum Matters (ERM) – Electromag-
netic Compatibility (EMC) standard for radio equipment and services – Part1:
Common technical requirements
Electromagnetic compatibility and Radio spectrum Matters (ERM) – Electromag-
netic Compatibility (EMC) standard for radio equipment and services – Part17:
Specific conditions for broadband data transmission system
Industrial, scientific and medical (ISM) radio-frequency equipment - Electromagnet-
ic disturbance characteristics - Limits and methods of measurement
56