The pairing procedure can fail for the following reasons:
•
Required by user with "Abort" button
•
Wrong answers
•
Timeout (User not entering response within the predefined time) 30 seconds
In case of failure the procedure must be repeated.
2.3.6 Unpairing - Delete Base Station
2.3.7 Unpairing procedure
MANUGENX5 - Version 1.01 24.03.2021
© 2021 0N3 s.r.l. - Subject to change without notice
Select a Base Station from the list and
press the red X button
Press the Unpair button and confirm the operation by
pressing the Yes button
13