Cleaning The Pot; Descaling The Pot; Cleaning The Tool Holder; Using The Cleaning Programme - Bosch MCC9555FWC User Manual

Position the beating whisks vertic-
4.
ally on the pins and push in firmly.
The beating whisks must move
easily.
a The beating whisks engage aud-
ibly.
Tip: You can clean the twin whisk in
the dishwasher.

Cleaning the pot

Requirement: "The tool has been re-
moved." → Page 91
Clean the pot thoroughly.
1.
Wipe down the pot with a soft,
2.
damp cloth and then dry.
Tips
¡ You can clean the pot in the dish-
washer.
¡ You can remove light discoloura-
tion on the bottom of the pot with
water and a little vinegar.
→ "Descaling the pot", Page 111

Descaling the pot

Requirement: The first signs of
limescale are visible.
Take the pot out of the main unit.
1.
Use a normal household descaler
2.
in the pot according to the instruc-
tions.
Clean the pot with a dishwashing
3.
brush or soft cloth.
Rinse the pot with plain water.
4.
Cleaning and servicing en
Dry the pot.
5.

Cleaning the tool holder

"Remove the tool holder."
1.
→ Page 109
Remove the silicone sealing ring
2.
from the tool holder.
Clean the silicone sealing ring with
3.
a soft cloth under running water.
Clean the tool holder with a brush
4.
under running water.
Dry all parts.
5.
Insert the tool holder with the silic-
6.
one sealing ring.
Turn the pot on its side.
7.
Tighten the threaded ring with
8.
wings as far as it will go.
a The symbols
Tip: You can clean the tool holder
and the silicone sealing ring in the
dishwasher.
Using the cleaning pro-
gramme
Your appliance has a special clean-
ing programme to automatically pre-
clean the pot and the tool used after
cooking. The cleaning programme
heats, soaks and rinses the pot
quickly and simply.
Note: The cleaning programme is not
suitable for removing remnants of
dough.
and line up.
111