Turn the cover for the outer lid anti-
4.
clockwise towards
a The symbols
Remove the cover for the outer lid.
5.
Flap up the outer lid with seal.
6.
Remove the outer lid with seal
7.
from the lid holder
Removing the tool holder
WARNING
Risk of burns!
The casing, pot, tools and metal
components heat up when the appli-
ance is used.
Only remove tools using the spat-
▶
ula.
Only take hold of the pot and lid
▶
by the handles.
Never take hold of the pot by its
▶
metal surfaces.
Never take hold of the tool holder
▶
before it has completely cooled
down.
.
and
line up.
.
Cleaning and servicing en
Never clean or transport the main
▶
unit if it is still hot.
Requirements
¡ "The lid has been removed."
→ Page 108
¡ "The tool has been removed."
→ Page 91
Take the pot out of the main unit.
1.
Turn the pot on its side.
2.
Turn the threaded ring with wings
3.
as far as it will go.
a The symbols
and
line up.
109