Cleaning And Servicing - Bosch MUM59N26CB Instruction Manual

Working with the blender
Figure J:
■ Press the release button and
move the swivel arm to
position 4.
■ Remove the blender drive cover.
■ Attach blender jug (mark on the handle
on mark on the base unit) and turn all the
way in an anti­clockwise direction.
■ Add ingredients.
Maximum capacity – liquid = 1.25 litres;
maximum capacity frothing or hot liquids
max. 0.75 litres.
■ Attach the cover and turn anti­clockwise
all the way into the blender handle. The
cover must be locked in position.
■ Set the rotary switch to the desired
setting.
Adding more ingredients
Figure J-8:
■ Switch off the appliance with the rotary
switch.
■ Remove the lid and add ingredients.
or
■ remove the funnel and gradually add solid
ingredients through the refill opening.
or
■ pour liquid ingredients through the funnel.
After using the appliance
■ Switch off the appliance with the rotary
switch.
■ Rotate the blender in a clockwise
direction and remove.
Tip: It is recommended to clean the blender
immediately after use.
W Attention!
Using unsuitable food may damage the
appliance.
■ Do not process food that is hotter than
70 °C in the blender jug.
■ Do not process frozen ingredients, apart
from ice cubes, unless they have been
added into a sufficient amount of liquid.
■ Do not process food that contains hard
components. Before processing pip
and stone fruits (apples, peaches, etc.),
remove the pips or stones.

Cleaning and servicing

Notes
Restrictions on processing:
■ Do not use it to chop ingredients like
almonds, onions, parsley and meat.
■ The blender cannot produce spreads,
such as peanut butter,coconut butter or
nut spreads.
■ Use enough liquid when mixing solid
food.
■ Mix powdered food with sufficient liquid
before blending, or dissolve it entirely
in liquid. Examples of powdered food
include icing sugar, cocoa powder,
roasted soy­beans, flour, protein
powder.
Cleaning and servicing
The attachments and accessories used
must be thoroughly cleaned after each use.
X Table O
Attention!
Do not use abrasive cleaning agents. Sur­
faces may be damaged.
Cleaning the base unit
W Risk of electric shock!
Never immerse the base unit in water or
place under running water. Do not use a
steam cleaner.
■ Remove mains plug.
■ Wipe the base unit and drive cover with
a damp cloth. If required, use a little
detergent.
■ Then dry the base unit.
Cleaning the bowl and tools
The bowl and tools are dishwasher­
proof. Do not wedge plastic parts in the
dishwasher, as they could be permanently
deformed during the washing process!
Cleaning the continuous-feed
shredder
W Risk of injury from sharp blades!
Do not grip the sharp blades or edges of the
cutting discs. Clean them with a brush.
All parts of the continuous­feed shredder
are dishwasher­proof.
en
29