Table of Contents
Advertisement
3.0 OPERATING INSTRUCTIONS
3.8 - Regulation of Combustion Air
On the Combustion lever, shown in Fig. A, each marker is an individual setting, as shown below:
• II ..... Ignition position, max. heat output
• I....... Nominal heat output with billet wood
• I....... Nominal heat output with wood briquettes
• 0 ..... Obtain glow
● Operating lever on „0":
● Operating lever on „I":
As the secondary air also contributes to the cleanliness of the glass pane, the operating lever should be set
on "I" minimum. This also applies in the event of low-load operation. When not in use the lever should be
set on"0", to reduce the cooling down of the room.
● Operating lever on „II":
Regulation of combustion air
Position of operating lever:
„II" ..... Ignition position, max. heat output
3.9 - Using the Wood Storage Compartment
„I" ....... Nominal heat output with billet wood
The wood storage compartment below the combustion chamber
„I" ....... Nominal heat output with wood briquettes
is fitted with a magnetic pressure closure. It can be opened by
„0" ..... Obtain glow
lightly pressing on the button (Olsberg logo). Likewise it can be
closed by lightly pressing.
● As the secondary air also contributes to the cleanliness
of the glass pane, the operating lever should be set on
"I" minimum. This also applies in the event of low-load
operation.
● When not operating the lever should be set on "0", to re-
duce the cooling down of the room.
4.0 - Measuring Negative Pressure
Above the combustion chamber opening, behind the upper
door, there is a measuring duct on which the negative pressure
in the combustion chamber can be measured with the door
closed during heating operation.
Operating lever for combustion air supply
all slide valves closed
Secondary air slide valve completely open /
Primary air slide valve completely closed
Secondary air slide valve completely open /
Primary air slide valve completely open
PAGE 13
Cleaning
Operating lever for the fire grate
What?
● With the help of the operating lever the fire grate can
be opened or closed to move the ash from the combus-
tion chamber to the ash pan by pushing the fire grate
inside of stove
back and forth.
● Primary air can only enter the combustion chamber if
the fire grate is set on open position.
connection piece
Wood storage compartment
glass panel
painted surfaces
Measuring negative pressure
in the combustion chamber
Above the combustion chamber opening, behind the up-
per door, there is a measuring duct on which the negative
pressure in the combustion chamber can be measured
The wood storage compartment below the combustion
with the door closed during heating operation.
chamber is fitted with a magnetic pressure closure. It can
be opened by lightly pressing on the button (Olsberg
logo). Likewise it can be closed by lightly pressing.
How often?
at least 1 x per year
at least 1 x per year
as required
as required
press here
Repl
Attent
Please
require
tee a t
In orde
impera
measuring duct
ber giv
The sto
ing co
We rec
ing the
17
Type n
Fabrica
Advertisement
Table of Contents
