Device Information; Charging The Device; Tips For Charging Your Device; Device Care - Garmin LILY Owner's Manual

Date Format: Sets the device to display the date in a month/day
or day/month format.
Language: Sets the device language.
Measurement Units: Sets the device to display the distance
traveled and temperature in statute or metric units.
Physio TrueUp: Allows your device to sync activities, history,
and data from other Garmin

Device Information

Charging the Device

This device contains a lithium-ion battery. See the Important
Safety and Product Information guide in the product box for
product warnings and other important information.
To prevent corrosion, thoroughly clean and dry the contacts and
the surrounding area before charging or connecting to a
computer. Refer to the cleaning instructions
Device, page 10).
1
Pinch the sides of the charging clip
the clip.
2
Align the clip with the contacts
the clip.
3
Plug the USB cable into a power source.
4
Charge the device completely.

Tips for Charging Your Device

• Connect the charger securely to the device to charge it using
the USB cable (Charging the Device, page
You can charge the device by plugging the USB cable into a
Garmin approved AC adapter with a standard wall outlet or a
USB port on your computer.
• View the remaining battery graphic on the device information
screen (Viewing Device Information, page

Device Care

Avoid extreme shock and harsh treatment, because it can
degrade the life of the product.
Do not use a sharp object to clean the device.
Never use a hard or sharp object to operate the touchscreen, or
damage may result.
Avoid chemical cleaners, solvents, and insect repellents that can
damage plastic components and finishes.
Thoroughly rinse the device with fresh water after exposure to
chlorine, salt water, sunscreen, cosmetics, alcohol, or other
harsh chemicals. Prolonged exposure to these substances can
damage the case.
Do not place in high temperature environments, such as a
clothes dryer.
10
devices.
®
WARNING
NOTICE
(Cleaning the
to open the arms on
, and release the arms of
10).
11).
NOTICE
Do not store the device where prolonged exposure to extreme
temperatures can occur, because it can cause permanent
damage.

Cleaning the Device

Even small amounts of sweat or moisture can cause corrosion
of the electrical contacts when connected to a charger.
Corrosion can prevent charging and data transfer.
1
Wipe the device using a cloth dampened with a mild
detergent solution.
2
Wipe it dry.
After cleaning, allow the device to dry completely.
TIP: For more information, go to www.garmin.com/fitandcare.

Changing the Bands

You can replace the bands with new Lily bands.
1
Use the band replacement tool to loosen the screws.
2
Remove the screws.
3
Align the new band with the device.
4
Replace the screws using the tool.
NOTE: Make sure the band is secure.
5
Repeat steps 1 through 4 to change the other band.
NOTICE
Device Information