Lovibond SD 60 Quick Start Manual

Insert the batteries
1
4
MEASUREMENT
Remove protective cap from the probe
off
Lock/Unlock Data!
unlock
C. Backlight ON/OFF
F. Store Data
off
D. Store Data
1. In lock mode: 2s
2. In measurement mode: 2s
3. When the storage is full, it will overwrite the oldest data.
ORP CALIBRATION
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Characters in RED
G. System Setup
Menu selection:
• Re-Calibrate according to individual recommendations! Rinse the electrode
with destilled water after each measurement.
• Choose Lovibond ® ORP Standard Solution
2s (latest memory#)
E. Calibrate ORP
Remove protective cap from the probe.
Power ON (see A)
(7.00 or 6.86)
Immerse the probe
into calibration
(31-12 24 or 12-31 12ampm)
solution.
To enter:
Adjustment To increase (+):
____________________________________________________________________________________________
Max. ± 150 mV of window:
Note: Icons/Characters in RED meaning "BLINK"
: Hit once / : Press and hold / : Release
to store
2
5
Automatically turns off after 20 minutes of
inactivity.
on off
Possible slight delay after pressing
before freeze of the data (!).
lock unlock
on off
After 3 sec. the file no. temporarily appears
on the display, e.g. 01.
Once the storage has reached max. capacity,
the data will overwrite the oldest files.
(or 2s
represent „Flashing symbols".
(dd-mm-yy/24hr or mm-dd-yy/12hr)
.....
∞
+
To decrease (-):
wait ( indicates „user calibrated")
3
+
+
-
-
-
-
+
+
6
∞
Press for
3 seconds
Press
)
(°C or °F)
3
Press and
hold