Page 4
Operation • Fitting the battery (2 x AAA (1.5 V), LR03) Change the batteries with this display indication. Check position of the O-Ring when opening/ closing the battery chamber lid! Switch the unit on using the ON/OFF key. The display shows: “0”. Make one Zero for all the methods: Swirl the instrument several times under the water surface allowing the sample chamber...
Page 5
Press the “Zero/Test“-key. The “---“ symbol flashes for approx. 6 seconds. The result appears in the display. Result below the lowest limit of the measuring range HIGH Measuring range exceeded Repeat Test Press the “Zero/Test“-key Change Method Press the “Mode“-key to scroll down. New zero: Press the “Zero/Test“-key for 2 sec.
Page 6
Delivery Content 1 Scuba II in a robust plastic case with hanger 2 Batteries (AAA) 20 DPD No.1 tablets 20 Phenolred tablets 10 DPD No.3 tablets 10 CyA tablets 10 Alka-M tablets 1 Stirring rod 1 Instruction Manual Order Code 21 61 00...
Need help?
Do you have a question about the Scuba II and is the answer not in the manual?
Questions and answers