Page 2
Plumbing contractor shall be responsible for installing shower control pane at the correct height to meet accessibility requirements. This manual covers all of the HN-200 variations and options available, including shower seat and curtain installation. Simply omit the steps which do not apply to the unit you are installing.
Page 3
HN-200 Recess-Mounted Shower Installation Pre-Installation Information The HN-200 shower is furnished assembled for job site installation. Particular care must be taken by the contractor for proper height placement of the shower. Always check local codes for compliance. Material Control Panel Material: The shower control panel is constructed of 14-gauge type 304 stainless steel .
Page 4
(1219 to 1524mm) Valve 19" (483mm) 33" 40" 33" (838mm) (1016mm) 37" (838mm) Top of (940mm) Top of Grab Bar Grab Bar 18" 18" (457mm) (457mm) Top of Seat Top of Seat Bradley • 215-741 Rev. C; ECN 15-03-004 4/29/2015...
Page 5
. Secure the flange to the wall with (2) #10-13 x 2" Phillip head screws provided . Install ten hooks onto the curtain rod and hang the curtain on the rod . Bradley • 215-741 Rev. C; ECN 15-03-004 4/29/2015...
Page 6
. It is emphasized that all products should be used in strict accordance with package instructions . Shower Curtain Repair Parts Part No Description 151-001 Curtain hooks 113-313A Curtain Rod 150-157 Shower Rod Flange 269-373 #10-13 x 2" Phillips Head Screw 170-006 Shower Curtain Bradley • 215-741 Rev. C; ECN 15-03-004 4/29/2015...
Need help?
Do you have a question about the HN-200 and is the answer not in the manual?
Questions and answers