Introduction - Siemens SIMATIC S5 Series Manual

Keyboard Editor
7.1

Introduction

Why Change Key
Assignments?
Files
7
7-2
If your PC has a keyboard other than the international standard
keyboard or if you wish to assign additional key combinations for
STEP 5, for example add the key combination ALT + N for
segment end, it may be useful to be able to change the key
assignments. If your PC has a standard keyboard (MFII keyboard),
you will be able to work comfortably with the existing key
assignments.
In the default setting of the editor the keyboard assignments are
given in German; you can, however, select another language.
The files are found in the directory DR:\STEP5\S5_ST.
File Description
S5ODS10X.EXE Keyboard editor Editor; manages and documents
S5ODS10X.RES Resource file
EXAMPLE.S5K Keyboard file
S5KXS01X.S5K Keyboard file
or
S5KXS01K.S5K
Content
user interface
Selects preset keytop texts (the
respective keyboard driver must be
loaded)
File with new keyboard
assignment (must be copied to the
directory DR:\STEP5\S5_ST)
Keyboard assignment (in the
directory \STEP5; if this file is not
present, STEP 5 loads the default
setting)
Working with S5-DOS/ST
C79000-G8576-C760-03