Preset Drives
In the lower part of the main menu the working area set is
(Function Key F5)
displayed;
local: ... "drive: path /" for the local device and
remote: ..."drive: path /" for the remote device
To set the drive/path required, select the corresponding menu via
the function key F5. You will find more details in the section
"Selecting the Preset Drives" on page 6-12.
Send
If the correct drive/path for the local and remote devices is
Mode/Receive
displayed in the main menu, select either
Mode (Function
F1
Keys F1/F3)
F3
to get the relevant menu for the function.
More details can be found in the section "Send Mode and Receive
Mode" on page 6-13.
Exit this Program
You exit the FTARC program with the function key F8.
(Function Key F8)
Working with S5-DOS/ST
C79000-G8576-C760-03
Send mode (local
remote) or
Receive mode (remote
local)
File Transfer
6
6-11