Information about the device.......... 4 ® Airgoclean 150 E Transport and storage............ 5 Assembly and start-up............ 5 https://hub.trotec.com/?id=44773 Operation ................ 6 Safety Available accessories............ 8 Read this manual carefully before starting or using the Errors and faults.............. 8 device. Always store the manual in the immediate vicinity Maintenance ................ 9...
Page 3
• Check accessories and connection parts for possible Improper use damage prior to every use of the device. Do not use any • Do not place the device on wet or flooded ground. defective devices or device parts. • Do not place any objects, e.g. clothing, on the device. •...
Note Device depiction Do not operate the device without an air filter inserted Front into the air inlet! Without the air filter, the inside of the device will be heavily contaminated. This could reduce the performance and result in damage to the device. Note Do not use abrasive cleaners or solvents to clean the device.
When positioning the device, observe the minimum distance Transport and storage from walls or other objects as described in the chapter Technical data. Note If you store or transport the device improperly, the device may be damaged. Note the information regarding transport and storage of the device.
Designation Meaning Operation Hours LEDs Indication of the number of hours Note of the activated timer: 1 h, 2 h, Avoid open doors and windows. 4 h or 8 h Control panel Timer button Switching on the timer function: 1 h, 2 h, 4 h, 8 h Speed LED Indication of the selected fan speed: Stage 1 = low...
Page 7
The speed LED (20) indicates the fan speed in automatic mode. Automatic switch-off ü The device is switched on. Air quality LED PM2.5 value Speed LED 1. Press the timer button (19) until the desired number of Illuminated in green 0-70 Stage 1 hours is shown on the hours LED (18).
• Wait for 10 minutes before restarting the device. If the contaminations may be in the air. Ventilate the room. device is not starting, have the electrics checked by a specialist company or by Trotec. The filter LED (11) is illuminated: • Check the air inlet (6) and air outlet (2) for proper fit.
Maintenance intervals Maintenance Maintenance and care interval before every as needed at least every at least every at least every at least start-up 2 weeks 4 weeks 6 months annually Check air inlets and outlets for dirt and foreign objects and clean if necessary Clean the exterior Visually check the inside of the device for dirt...
Page 10
Tasks which require the housing to be opened or liquid cleaning agents to clean the 3-1 filter. must only be carried out by authorised specialist companies or by Trotec. Note The lifetime of the prefilter with integrated HEPA Cleaning the housing carbon filter depends on the ambient conditions and Clean the housing with a soft, damp and lint-free cloth.
Page 11
2. Pull the strips (24) to take the prefilter with integrated 6. Put the air inlet (6) back on the device. HEPA carbon filter (23) out of the device. 7. Press the ION button (13) for two seconds to reset the 3. Clean the outside of the prefilter with integrated HEPA Filter LED (11).
For further return options provided by us please refer to our website https://de.trotec.com/shop/. The separate collection of waste electrical and electronic equipment aims to enable the re-use, recycling and other forms...
Need help?
Do you have a question about the AIRGOCLEAN 150 E and is the answer not in the manual?
Questions and answers