Trotec AIRGOPRO 8 Original Instructions Manual
  1. Manuals
  2. Brands
  3. Trotec Manuals
  4. Air Cleaner
  5. AIRGOPRO 8
  6. Original instructions manual

Trotec AIRGOPRO 8 Original Instructions Manual

Hide thumbs Also See for AIRGOPRO 8:
Table of Contents

Advertisement

Quick Links

Download this manual
®
AIRGOPRO
8
EN
ORIGINAL INSTRUCTIONS
ODOUR NEUTRALISER

Advertisement

Table of Contents
loading

Related Manuals for Trotec AIRGOPRO 8

Summary of Contents for Trotec AIRGOPRO 8

  • Page 1 ® AIRGOPRO ORIGINAL INSTRUCTIONS ODOUR NEUTRALISER...

  • Page 2: Table Of Contents

    Safety .................. 2 Information about the device.......... 5 ® AirgoPro Transport and storage............ 6 Assembly and start-up............ 6 https://hub.trotec.com/?id=44831 Operation ................ 7 Safety Available accessories............ 10 Read this manual carefully before starting or using the Errors and faults.............. 10 device. Always store the manual in the immediate vicinity Maintenance ................ 11...
  • Page 3 • Do not use the device as private individual or at home / in operation. Order a new power cable with mains plug from a domestic environment. Trotec and replace the defective power cable with mains plug with the new one. • Do not place the device on wet or flooded ground.
  • Page 4 Personnel qualifications Note Do not operate the device without an air filter inserted People who use this device must: into the air inlet! • have been trained in handling the device and be aware of Without the air filter, the inside of the device will be the dangers that occur when working with odour heavily contaminated.

  • Page 5: Information About The Device

    Information about the device Device description With the device AirgoPro 8, kitchen smells or musty smells as well as the smells left behind by cigarette smoke or a fire etc. can be effectively removed. The device serves for the odour elimination in closed rooms. During the treatment, the oxygen contained in the room air is converted so that existing odour molecules are broken down by means of oxidation.

  • Page 6: Transport And Storage

    Start-up Transport and storage When positioning the device, observe the minimum distance Note from walls or other objects as described in the chapter If you store or transport the device improperly, the Technical annex. device may be damaged. Note the information regarding transport and storage of the device.

  • Page 7: Operation

    • Make sure that extension cables are completely unrolled. Designation Description • The room temperature should be approx. 5 °C higher than On/off switch Switching the device on or off the usual room temperature. O = switched off I = switched on Connecting the power cable •...
  • Page 8 Switch-on / switch-off Setting the treatment duration 1. Switch on the device by setting the timer (8) to any desired Using the integrated timer (8) you can set the treatment duration time. to a period from 0 to 99 hours. Use the rotary switch for the 2.
  • Page 9 Operating parameters Shutdown The respective treatment duration that is required depends on Caution the condition. Note the following factors: Risk of injury caused by ozone! • type of smell Have especially trained staff check the ozone • odour intensity concentration before entering the room and permitting others to access it.

  • Page 10: Available Accessories

    7.140.000.079 • Wait for 10 minutes before restarting the device. If the plug device is not starting, have the electrics checked by a Fuse 3.15 mA 7.140.000.272 specialist company or by Trotec. Transformator 7.140.000.006 The device is very loud: Electrode 7.140.000.432 • Position the device on a dry, firm and level surface.

  • Page 11: Maintenance

    Maintenance intervals Maintenance Maintenance and care interval before every as needed at least every at least every at least every at least start-up 2 weeks 4 weeks 6 months annually Check air inlets and outlets for dirt and foreign objects and clean if necessary Clean the exterior Visually check the inside of the device for dirt...
  • Page 12 Activities required before starting maintenance Cleaning In addition to the inspection of the device and its components Warning of electrical voltage for proper condition you should also ensure thorough cleaning Do not touch the mains plug with wet or damp hands. as part of the regular maintenance activities.

  • Page 13: Technical Annex

    6. Put the cover of the air filter on the device and fasten it by 2. Clean the electrode using a (lint-free) dry or damp cloth. means of the screws. Especially remove dust and other residues from the intermediate spaces. Make sure that no fluff or fibres remain after cleaning.
  • Page 14 Circuit diagram odour neutraliser AirgoPro® 8...
  • Page 15 Exploded assembly drawing Info The position numbers of the spare parts differ from those describing the positions of the components mentioned in these instructions. Designation Designation Operating hours counter Intensity level controller Connection plug incl. mains plug On/off (mains) switch Fuse 3.15 mA Transformator Microswitch...

  • Page 16: Disposal

    You can also find out about other return options that apply for many EU countries on the website https://hub.trotec.com/?id=45090. Otherwise, please contact an official recycling centre for electronic and electrical equipment authorised for your country.
  • Page 17 Trotec GmbH Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.com...

This manual is also suitable for:

1.180.000.020

Table of Contents