Information about the device.......... 4 ® Airgoclean 200 E Transport and storage............ 5 Assembly and start-up............ 6 https://hub.trotec.com/?id=44774 Operation ................ 7 Safety Available accessories............ 9 Read this manual carefully before starting or using the Errors and faults.............. 10 device. Always store the manual in the immediate vicinity Maintenance ................ 11...
Page 3
• Check accessories and connection parts for possible Intended use damage prior to every use of the device. Do not use any Use the device for cleaning the air in interior spaces only whilst defective devices or device parts. adhering to the technical data and safety instructions. •...
Residual risks Information about the device Warning of electrical voltage Device description Work on the electrical components must only be The device serves to filter the room air with the aim of reducing carried out by an authorised specialist company! slight and medium contaminations and odours in order to Warning of electrical voltage improve the air quality.
Device depiction Transport and storage Front view Note If you store or transport the device improperly, the device may be damaged. Note the information regarding transport and storage of the device. Transport To make the device easier to transport, it is fitted with a carry handle.
• Before restarting the device, check the condition of the Assembly and start-up power cable. If there are doubts as to the sound condition, contact the customer service. Scope of delivery • Only put up the device in an upright, stable position on firm •...
Designation Meaning Operation Mode LED Illuminated according to the selected Note operating mode: Avoid open doors and windows. • Auto LED = automatic mode Control panel • Sleep LED = night mode • Turbo LED = turbo mode Mode button Selecting the operating mode: 10 11 15 16...
Page 8
Setting the operating mode Info Automatic mode and virus filtration The device comes with the following operating modes: • Automatic mode Do not use the automatic mode if the device is used for virus filtration! • Night mode The integrated sensors only respond to air pollution •...
Automatic switch-off Available accessories ü The device is switched on. 1. Press the Timer button (10) until the desired number of Warning hours is shown on the segment display (5). Only use accessories and additional equipment ð The timer is now set to the desired number of hours. specified in the operating manual.
• Check the HEPA carbon filter for dirt. If necessary, replace device is not starting, have the electrics checked by a the HEPA carbon filter. specialist company or by Trotec. • Smoke, e.g. dense tobacco smoke, odours and • Check the air inlet (3) and air outlet (1) for proper fit.
Maintenance intervals Maintenance Maintenance and care interval before every as needed at least every at least every at least every at least start-up 2 weeks 4 weeks 6 months annually Check air inlets and outlets for dirt and foreign objects and clean if necessary Clean the exterior Visually check the inside of the device for dirt...
Page 12
Tasks which require the device to be opened must Note only be carried out by authorised specialist The lifetime of the HEPA carbon filters depends on the companies or by Trotec. ambient conditions and the application period of the device. Cleaning the housing •...
Page 13
2. Remove the prefilter (20) from the device. 7. Insert the new HEPA carbon filter into the device. Make sure that the strips (22) are positioned on the outside. 8. Reinsert the prefilter (20) into the device. 3. If necessary, clean the prefilter (20) as described in Cleaning the prefilter.
You can also find out about other return options that apply for many EU countries on the website https://hub.trotec.com/?id=45090. Otherwise, please contact an 3. Allow the filter to dry completely. Do not insert a wet filter official recycling centre for electronic and electrical equipment into the device! authorised for your country.
Need help?
Do you have a question about the AIRGOCLEAN 200 E and is the answer not in the manual?
Questions and answers