Advertisement
USING THE HOB
Before you begin, it is important to know:
All functions of this hob are designed in order to comply with the
most stringent safety regulations.
For this reason:
• Some functions will not be activated, or will be automatically
deactivated, in the absence of pots on the burners or when
they are poorly positioned.
• In other cases the activated functions will be automatically
deactivated after a few seconds when the specific function requires
a further setting that has not been selected (e.g.: "Turn the hob
on" without "Selecting the cooking zone" and the "Operating
temperature", or the "Lock Function" or the "Timer" function).
Warning! In the case (for example) of prolonged use, the
cooking zone may not immediately shut down because it is in the
cooling phase; the " " symbol will appear on the cooking zone
display, to indicate the execution of this phase.
Wait for the display to turn off before approaching the cooking
zone.
Cooking zone display
the cooking area display indicates:
Cooking zone active
Power Level
Residual Heat Indicator
Pot Detector
Warming Function active
Child Lock Function active
Pause Function
Automatic Heat UP Function
Bridge Function active
Hob characteristics
Safe Activation
The product is activated only in the presence of pots on the
cooking zone: the heating process does not start or is interrupted if
there are no pots, or if these are removed.
Pot Detector
The product automatically detects the presence of pots on the
cooking zones.
Safety Shut Down
For safety reasons, each cooking zone has a maximum operating
time, which depends on the maximum power level set.
Residual Heat Indicator
When one or more cooking zones shut down, the presence of
residual heat is indicated by a visual signal on the corresponding
zone display, by way of the " " symbol.
Operation
Note: Before activating any functions, the desired zone must be
activated
Push (tap)
The indicator light will turn on to indicate that the hob/extractor is
ready for use
Press again to turn off
Note: This function has priority over the others.
Tap (press onto the Selection zone (3) corresponding to the
desired cooking zone.
The hob features 9 power levels
Tap and swipe with your fingers onto the Selection zone (3):
to the right, to increase the power level;
to the left to decrease the power level.
In order to reach a constant cooking power and avoid power
self-regulation (power increase-decrease), use a heat setting
higher than 7.
...
-
The product features a supplementary power level (after level ),
which remains active for 10 minutes, after which the temperature
returns to the previously set value.
Tap and swipe with your fingers onto the Selection zone (3)
(beyond the level ) and activate the Power Booster
The Power Booster level is shown on the display of the selected
zone with the symbol"
Thanks to the Bridge function, the cooking zones can operate in a
combined way, creating a single zone with the same power level.
This function allows evenly distributed cooking with large-sized
pots and pans.
You can use both the "Master" front cooking zone and the
corresponding "Secondary" cooking zone on the back.
(to check which zones are equipped with this function, see the
illustrated part of this manual).
To activate the Bridge Function:
• simultaneously select the two selection zones of the
cooking zones that you want to use
• the Bridge (21) indicator of the "Secondary" cooking zone
lights up
• use the Selection zone (3) of the "Master" cooking zone to
set the operating Power Level
• to disable the Bridge Function all you have to do is to repeat the
activation procedure
51
Switch-on
ON/OFF button of hob/extractor fan
Selecting the cooking zones
9 Power Level
Power Booster
"
Bridge Zones
Advertisement
