Siemens KGF Series User Manual page 17

2. Confirm the start of customer service
access in the app.
During customer service access, the
symbol CS appears on the control
panel.
3. As soon as customer service has
obtained the necessary information,
they will end their access.
Note
You can interrupt remote diagnostics
early by switching off customer service
access in the Home Connect app.
Information on data protection
When your Home Connect refrigerator is
connected for the first time to a WiFi
network that is connected to the Internet,
your refrigerator transmits the following
categories of data to the Home Connect
server (initial registration):
Unique appliance identification
■
(consisting of appliance codes as well
as the MAC address of the installed
WiFi communication module).
Security certificate of the WiFi
■
communication module (to ensure a
secure data connection).
The current software and hardware
■
version of your refrigerator.
Status of any previous resetting to the
■
factory settings.
This initial registration prepares the
Home Connect functions for use and is
required only when you want to use
Home Connect for the first time.
Note
Be aware that the Home Connect
functions can be used only in
conjunction with the Home Connect app.
You can call up information on data
protection in the Home Connect app.
Declaration of conformity
BSH Hausgeräte GmbH hereby declares
that the appliance with Home Connect
function meets the essential
requirements and the other relevant
provisions of the Directive 2014/53/EU.
A detailed RED declaration of conformity
can be found online at http://
www.siemens-home.bsh-group.com
among the additional documents on the
product page for your appliance.
2.4 GHz band: 100 mW max.
en
17