Siemens KGF Series User Manual page 15

2. Press °C button repeatedly until the
displays SA and oF are shown.
3. Press the + button.
The appliance is ready for manual
connection.
The display shows an animation for
5 minutes.
Perform the steps below during this
period.
4. The refrigerator has now set up its
own WiFi network with the network
name HomeConnect.
You can now access this network with
your mobile device.
5. Open the settings menu of the mobile
device and call up the WiFi settings.
6. Connect the mobile device with the
WiFi network HomeConnect.
Password: HomeConnect
It can take up to 60 seconds to
establish the connection.
7. After successfully connecting, open
the Home Connect app on the mobile
device.
The app will search for the refrigerator.
8. As soon as the refrigerator has been
found, enter the network name (SSID)
and the password (Key) of your own
home network (WiFi) into the
corresponding fields.
9. Confirm with button Transfer to
household appliance.
If the connection is successful, on
■
flashes in the refrigerator display.
You can now connect the
refrigerator to the app.
If the display shows oF, it was not
■
possible to establish a connection.
Enter the password again, ensuring
that it is spelt correctly.
Check whether the refrigerator is
located within the range of the
home network (WiFi).
Repeat the process.
Connecting your refrigerator to
the Home Connect app
Once the connection between the
refrigerator and WiFi has been
established, you can connect the
refrigerator to the app.
1. Press super button and lock button
simultaneously to open the Home
Connect menu.
The display shows Cn.
Note
Press both buttons at exactly the
same time. Button operation is locked
if only the lock button is pressed for a
longer period. Press lock button again
until the lock is lifted.
2. Press °C button repeatedly until the
displays PA (pairing = connect with
app) and oF are shown.
3. Press + button to connect the
appliance to the app.
The display shows an animation.
As soon as the refrigerator and the
app are connected, the display shows
on.
4. Open the app and wait until the
refrigerator is displayed.
Use Add to confirm the connection
between the app and the refrigerator.
If the refrigerator is not displayed
automatically, click on Add device in
the app and follow the instructions. As
soon as your refrigerator is displayed,
add it with +.
en
15