Siemens KGF Series User Manual page 14

en
Setting up Home Connect
Notes
Observe the Home Connect
■
supplementary sheet, which is
available with the instructions for
download under http://www.siemens-
home.bsh-group.com. To do so, enter
the E-number of your appliance in the
search field.
After switching on the appliance, wait
■
at least two minutes until internal
appliance initialisation is complete.
Only then start setting up Home
Connect.
To implement settings via Home
■
Connect, you must have installed the
Home Connect app on your mobile
device. Refer to the Home Connect
documents supplied for more
information. Follow the steps specified
by the app to implement the settings.
The Home Connect menu will close
■
automatically when the appliance is
not operated for a lengthy period of
time. You can find information on how
to open the Home Connect menu at
the start of the appropriate sections.
Automatic connection with the home
network (WiFi)
If a WiFi router with WPS function is
available, you can automatically connect
the refrigerator to your WiFi.
1. Press super button and lock button
simultaneously to open the Home
Connect menu.
The display shows Cn.
Note
Press both buttons at exactly the
same time. Button operation is locked
if only the lock button is pressed for a
longer period. Press lock button again
until the lock is lifted.
14
2. Press °C button repeatedly until the
displays AC and oF are shown.
3. Press the + button.
The appliance is ready for automatic
connection.
The display shows an animation for
2 minutes.
Perform the steps below during this
period.
4. Activate the WPS function on the
home network (WiFi) router (e.g. using
the WPS/WiFi button; information on
this topic can be found in the router
documentation).
If the connection is successful, on
■
flashes in the refrigerator display.
You can now connect the
refrigerator to the app.
If the display shows oF, it was not
■
possible to establish a connection.
Check whether the refrigerator is
located within the range of the
home network (WiFi).
Repeat the process or establish the
connection manually.
Manual connection with the home
network (WiFi)
If the WiFi router present does not have a
WPS function, or if this is unknown, you
can manually connect the refrigerator
with the home network (WiFi).
1. Press super button and lock button
simultaneously to open the Home
Connect menu.
The display shows Cn.
Note
Press both buttons at exactly the
same time. Button operation is locked
if only the lock button is pressed for a
longer period. Press lock button again
until the lock is lifted.