Siemens KGF Series User Manual page 16

en
5. Follow the instructions in the app until
the process is complete.
The displays show PA and on.
■
The refrigerator has been
successfully connected to the app.
If the connection has failed, please
■
check whether the mobile device is
connected to the home network
(WiFi).
Then connect the refrigerator to the
app again.
If the display shows Er, reset the
■
Home Connect settings and
perform set-up again from the
beginning.
Checking signal strength
You should verify the signal strength if no
connection can be established.
1. Press super button and lock button
simultaneously to open the Home
Connect menu.
The display shows Cn.
Note
Press both buttons at exactly the
same time. Button operation is locked
if only the lock button is pressed for a
longer period. Press lock button again
until the lock is lifted.
2. Press the°C button repeatedly until
the display shows SI. In the second
display, a value appears between
0 (no reception) and 3 (full reception).
Note
The signal strength should be at least
2. If the signal strength is too weak,
the connection may be interrupted.
Place the router and the refrigerator
closer together, ensure that the
connection is not disturbed by
shielding walls or install a repeater to
strengthen the signal.
16
Resetting the Home Connect settings
If the connection process does not work
or you would like to log the refrigerator
on to a different home network (WiFi),
you can reset the Home
Connect settings:
1. Press super button and lock button
simultaneously to open the Home
Connect menu.
The display shows Cn.
Note
Press both buttons at exactly the
same time. Button operation is locked
if only the lock button is pressed for a
longer period. Press lock button again
until the lock is lifted.
2. Press °C button repeatedly until the
displays rE and oF are shown.
3. Press the + button.
The display shows a short
■
animation and then again oF.
The Home Connect settings have
been reset.
If the display shows Er, start the
■
reset again or call customer
service.
Customer service access
If you contact customer service, they can
access your appliance and view its
status after you have given your consent.
You need to have your appliance
connected to home network (WiFi) in
order to do this.
Further information about customer
service access and its availability in your
country is available under www.home-
connect.com in the Help & support area.
1. Contact customer service.