overload shutdown circuit. This shutdown is intermittent. It will automatically restart,
then shutdown like a flashlight. We recommend you to check the output of your
appliance.
Trouble Loads
CAUTION
Some equipment may be damaged by the Mobile Digital Power Inverter's modified
sine wave output.
Some appliances, including the types listed below, may be damaged if they are
connected to the Mobile Digital Power Inverter:
• Electronics that modulate RF (radio frequency) signals on the AC line
will not work and may be damaged.
• Speed controllers found in some fans, power tools, kitchen appliances, and
other loads may be damaged.
• Some chargers for small rechargeable batteries can be damaged. See
"Precautions for Using Rechargeable Appliances" for details.
• Metal halide arc (HMI) lights can be damaged.
Important: If you are unsure about powering any device with the
Mobile Digital Power Inverter, contact the manufacturer of the device.
Mobile Digital Power Inverter unit
Minimal maintenance is required to keep your Mobile Digital Power Inverter
operating properly. Periodically you should:
• Clean the exterior of the unit with a damp cloth to prevent the
accumulation of dust and dirt.
• Ensure that the DC cables are secure and fasteners are tight.
• Make sure the ventilation openings on the AC and DC panels and
the bottom of the inverter are not blocked.
11