Advertisement
EXPERT CONTROLLER OPERATION
4-way Menu switch:
-
Set no. Of wraps
-
Change/Reset Bale Sub-Total
-
Access Operator Setup Menu
-
Access Technician Setup Menu
Pause bale rotation (A)
Close cutter
Slow wrap arm rotate
Reverse wrap arm
Not used on S or ARC
Power on/off /
Emergency Stop
The RF (Radio Frequency) remote is required if you wish to operate the
RF Receiver
The red button on the
rear of the remote must
be pressed while
pressing any other
button (except "STOP").
RF REMOTE OPERATION
1814 wrapper remotely.
- Add additional
wraps (A)
- Rotate bale if not
level (A)
- Tip return (M)
Rotate wrap
arms forward
Open Cut & Start
- Current No. of wraps
- Target No. of wraps
- Wrapping speed (RPM)
- Bale total
- Grand total No. of bales
- Mode: Manual /Auto
Pause wrapping (A)
Rotate rollers (M)
Level bale for unloading (if
not level) (A)
Open cutter
Fast wrap arm rotate
Resume wrapping
Add additional wraps
Unload bale (A)
Tip & Rotate rollers (M)
Start Auto wrap cycle
Select Manual or Auto
Auto Start
wrapping
- Auto Unload (A)
- Unload (M)
Emergency Stop
Rotate wrap arms
in reverse
Close Cut & Start
Advertisement
