Advertisement
AUXILIARY CONTROL VALVES
1.
Used for lowering the machine
to the ground in preparation for
wrapping.
2.
Used for adjusting hydraulic jack
at drawbar. This is necessary for
levelling the machine prior to
wrapping.
3.
Used for adjusting the width of
the rocking rollers when
changing to different size bales.
4.
Used for raising and lowering
the unloading conveyor.
ENTERING THE TRANSPORT POSITION
1. Fully raise the unloading conveyor and
lock in place.
2. Raise the machine from the ground
using the Auxiliary Control lever No. 1.
3. Attachment to the tractor can be
assisted by raising or lowering the
drawbar using the Auxiliary Control
lever No.2.
4. Switch off the Engine.
3
1
2
4
Advertisement
