Yaesu FTM-300DR Operating Manual page 5

Do not operate the device when flam-
mable gas is generated.
Doing so may result in fire and explo-
sion.
Do not transmit in crowded places
in consideration of people who are
fitted with medical devices such as
heart pacemakers.
Electromagnetic waves from the device
may affect the medical device, resulting
in accidents caused by malfunctions.
Do not use voltages other than the
specified power supply voltage.
Doing so may result in fire and electric
shock.
Do not transmit continuously for
long periods of time.
This may cause the temperature of the
main body to rise and result in burns
and failures due to overheating.
Do not dismantle or modify the de-
vice.
This may result in injury, electric shock
and equipment failure.
Do not handle the power plug and
connector etc. with wet hands. Also
do not plug and unplug the power
plug with wet hands.
This may result in injury, liquid leak,
electric shock and equipment failure.
When smoke or strange odors are
emitted from the radio, turn off the
power and disconnect the power
cord from the socket.
This may result in fire, liquid leak,
overheating, damage, ignition and
equipment failure. Please contact our
company amateur customer support or
the retail store where you purchased
the device.
Keep the power plug pins and the
surrounding areas clean at all times.
This may result in fire, liquid leak, over-
heating, breakage, ignition etc.
Do not touch any liquid leaking from
the liquid display with your bare
hands.
There is a risk of chemical burns occur-
ring when the liquid comes into contact
with the skin or gets into the eyes. In this
case, seek medical treatment immediate-
ly.
WARNING
Do not place the device in areas that
may get wet easily (e.g. near a hu-
midifier).
This may result in fire, electric shock
and equipment failure.
When connecting a DC power cord,
pay due care not to mix up the posi-
tive and negative polarities.
This may result in fire, electric shock
and equipment failure.
Do not use DC power cords other
than the one enclosed or specified.
This may result in fire, electric shock
and equipment failure.
Do not bend, twist, pull, heat and
modify the power cord and connec-
tion cables in an unreasonable man-
ner.
This may cut or damage the cables and
result in fire, electric shock and equip-
ment failure.
Do not pull the cable when plugging
and unplugging the power cord and
connection cables.
Please hold the plug or connector when
unplugging. If not, this may result in fire,
electric shock and equipment failure.
When transmitting, keep the antenna
at least 1.8 m (VHF) or 2.2 m (UHF)
away from your body.
Do not use modified or damaged an-
tennas.
Application for FCC/IC
FCC ID: K6620715X40
IC: 511B-20715X40
5