Battery Replacement - Triplett CFM100 User Manual

1.800.544.2843
4. Note that AUTO POWER OFF is re-enabled each time the meter is turned
on.
5. Also note that AUTO POWER OFF is disabled in CFM/CMM or Average
mode.

Battery Replacement

When appears on the LCD, the 3*1.5V AA battery must be replaced.
1. Disconnect the sensor.
2. Remove the meter's rubber protective jacket
3. Use a Phillips screwdriver to open the rear battery compartment
4. Replace the 3*1.5V AA battery
5. Close the battery compartment and replace the meter's protective jacket
www.calcert.com
15
10 20
5 25
0 30
sales@calcert.com