Chapter 2: Removing And Installing Components; Recommended Tools; Screw List - Dell XPS 13 9305 Service Manual

Removing and installing components
NOTE: The images in this document may differ from your computer depending on the configuration you ordered.

Recommended tools

The procedures in this document may require the following tools:
● Phillips screwdriver #0
● Torx #5 (T5) screwdriver
● Plastic scribe

Screw list

NOTE: When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and
then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is
restored when the component is replaced.
NOTE: Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when
replacing a component.
NOTE: Screw color may vary with the configuration ordered.
Table 1. Screw list
Component Secured to
Keyboard Palm-rest assembly
Fingerprint-reader Palm-rest assembly
board
Power button Palm-rest assembly
System board Palm-rest assembly
Fans System board
Speakers Palm-rest assembly
Heat sink System board
Headset port Palm-rest assembly
Display assembly Palm-rest assembly
Wireless antenna and System board
camera cable bracket
10 Removing and installing components
Screw type Quantity
M1.6x1.5 29
M1.6x1.5 1
M1.4x1.7 2
M1.6x2.5 10
M1.6x3L 2
M2x2 4
M2x3 4
M1.6x3 1
M2.5x4 4
M1.6x3L 1
2
Screw image