Installation - Ubiquiti AF60 Quick Start Manual

7/23/2020
7. Configure the following settings:
a. For one airFiber radio, enable Access Point mode. For the other airFiber radio (the
Station), keep Access Point disabled.
b. Enter a name in the SSID field. This must be the same on both the AP and the
Station.
c. In the WPA2 Preshared Key field, enter a combination of alphanumeric characters
(0-9, A-Z, or a-z).
8. Click Save Changes.
9. Configure each airFiber radio with a unique IP address:
a. Click the
b. Review the Network settings to ensure that each airFiber radio has a unique IP
address. Each can get its IP address via DHCP, or use a static IP address.
DHCP
network, the airFiber radio will receive its address via DHCP.
Fallback IP
the IP Address setting on the other radio. The fallback IP address is:
192.168.1.20
c. Click Save Changes.
UNMS Management
You can manage your device using UNMS, which lets you configure, monitor, upgrade,
and back up your devices using a single application. Get started at

Installation

1.
https://dl.ubnt.com/qsg/AF60/AF60_EN.html
AF60 Quick Start Guide
Note: The key is an alphanumeric password between 8 and 63 characters
long.
icon.
By default DHCP client is enabled; if there is a DHCP server on your
If you use the fallback IP address on one radio, you must change
AF60 Quick Start Guide
www.unms.com
8/23