Table of Contents
Advertisement
Antenna Compatibility
The airFiber AF‑11FX radio is designed for use with the
following airFiber X antenna models:
• AF‑11G36
1
Installation Requirements
• Clear line of sight between airFiber radios
• Vertical mounting orientation
• Mounting point:
• At least 1 m below the highest point on the structure
• For tower installations, at least 3 m below the top of
the tower
• Ground wires – min. 10 AWG (5 mm
1 m. As a safety precaution, ground the airFiber radio to
grounded masts, poles, towers, or grounding bars.
WARNING:
airFiber radio will void your warranty.
• (Recommended) 2 Outdoor Gigabit PoE surge protectors
Note:
protection, follow your local electrical regulatory
codes.
• (Optional) DC power source (if not using PoE)
• Outdoor, shielded Category 6 (or above) cabling and
shielded RJ‑45 connectors are required for all wired Ethernet
connections.
2 Check your local/regional regulations for the maximum antenna gain
allowed for your application.
Failure to properly ground your
For guidelines about grounding and lightning
) and max. length:
2
Advertisement
Table of Contents
