Advertisement
用带尖工具把白色塞扣拨下遥
用 2.5mm 六角扳手 (客户自备)把
四个螺钉拆下遥
将上下盖拆下后袁即可拆下云雾式
出水口遥
用白醋浸泡 30 分钟后即可清除污
垢遥
确保 O 型圈的位置正确遥
按顺序装回所有零件遥
适用于所有加工处理过的表面院以中性肥皂水
清洗镀层表面袁再以干净的软布彻底擦干整个表
面遥 许多清洁剂袁比如氨水尧去污粉及洁厕灵等袁
会对电镀表面造成伤害袁切忌使用遥
有磨损性的清洁用具或清洁剂也不可使用于科
勒牌的水龙头及其配件上遥
1119910-2-A
Grommet
塞扣
Screw
螺钉
Kotton Spray
云雾式出水口
O-ring
O型圈
All Finishes: Clean the finish with mild soap and warm
water. Wipe entire surface completely dry with clean soft
cloth. Many cleaners may contain chemicals, such as
ammonia, chlorine, toilet cleaner etc. which could
adversely affect the finish and are not recommended for
cleaning.
Do not use abrasive cleaners or solvents on Kohler
faucets and fittings.
Use a suitable tool to remove the four
grommets.
Using the 2.5mm hexagon wrench(not
supplied), remove the four screws.
Separate the sprayplate assembly into its
individual components.
O-ring
Clean the kotton spray by soaking them in
O型圈
warm vinegar for 30 minutes.
Make sure that the O-rings are
located correctly.
Reassemble the components in reverse
order.
Advertisement
