Integrated Top Tube Bento Box; Integrated Bottom Bracket Storage - Canyon SPEEDMAX Manual

42

INTEGRATED TOP TUBE BENTO BOX

Mount the hydration bladder again by proceeding
in reverse order.
Make sure to insert the hydration system back
into the frame at the internal stiffening. Finish by
pressing the hydration bladder including mount
into the seat of the frame.
To ensure a better fit blow air through the drinking
tube into the hydration bladder.
CLEANING THE HYDRATION BLADDER
The cleaning can be carried out with customary
cleaning tabs.
Dissolve the cleaning tab in water.
X
Fill the cleaning liquid into the hydration bladder.
X
Shake the hydration bladder.
X
Pour out the liquid.
X
Rinse with clear water.
X
You find more information at www.hydrapak.com
The hydration bladder should be emp‑
tied, cleaned and above all dried after
every ride.
Poorly cleaned and dried hydration
bladders can result in the formation of
harmful germs, mould etc. Risk of nausea and
damage to health!
INTEGRATED TOP
TUBE BENTO BOX
Your Canyon Speedmax is equipped with the inte‑
grated top tube bento box as standard. This sys‑
tem provides space for provisions (e.g. energy bars
and gel) and tools or the like.
Do not sit on the cover of the top tube bento box
to avoid any damage to the cover.
Do not sit on the top tube and especial‑
ly not on the cover of the top tube ben‑
to box.
INTEGRATED BOTTOM
BRACKET STORAGE
The integrated bottom bracket storage (BB stands
for bottom bracket) provides space for necessary
accessories to repair punctures.
Turn the left crank arm in a lower position (rec‑
ommended position: "6 o'clock position").
The cover can be removed without tool. Press the
cover with your thumbs on the right and left side
and push the cover towards the rear wheel. Then
you can remove the cover.
Contents of the integrated bottom bracket stor‑
age: 1 pair of tyre levers, 1 valve for CO ‑cartridge,
2
1 spare tube (purchased items: max. 2 CO
tridges)

INTEGRATED BOTTOM BRACKET STORAGE

To re‑mount the cover on the frame position the
cover slightly offset to the rear and slide it for‑
ward.
The cover must engage audibly.
‑car‑
2
43