Integrated Hydration System - Canyon SPEEDMAX Manual

Hide thumbs

Table Of Contents

Table of Contents

IMPACT PROTECTION UNIT

IMPACT PROTECTION UNIT (IPU)

Your Canyon Speedmax is fitted with an end stop,

also referred to as Impact Protection Unit or IPU.

This IPU avoids that the handlebars or its fittings

collide with the top tube limiting the possible

handlebar range to +/‑ 70 degrees.

The IPU is underneath the lower headset and not

visible when the fork is assembled.

The replacement requires a certain

amount of experience and must be per‑

formed by Canyon. Contact our service hotline

or use our contact form.

Riding without IPU can make the han‑

dlebars or the handlebar fittings collide

with the top tube. The frame can sustain dam‑

age.

INTEGRATED

HYDRATION SYSTEM

You can fit your Canyon Speedmax with the Inte‑

grated Hydration System that is included in the

scope of delivery.

This system offers a hydration bladder in the

down tube that allows you to fill in 700 ml of wa‑

ter (as of frame size M) or 500 ml of water (with

frame sizes XS and S).

You need not remove the hydration bladder for

filling. You can fill the hydration bladder through

the quick‑fill‑port on the top tube.

The hydration system is only designed

to be used with water. Canyon does not

guarantee the use of any other mixed drink.

The best way to fill the system is to position your

water bottle directly at the quick‑fill‑port and to

press the water into the hydration bladder.

For the filling process the valve of the integrated

hydration system must be active and completely

pressed downwards.

REMOVING THE HYDRATION BLADDER

To clean and dry the hydration bladder you have

to remove it from the down tube. The hydration

bladder must be empty before you remove it. To

empty the hydration bladder you can place the

Speedmax upside‑down, if necessary, and actuate

the valve.

Pull the drinking tube from its guide between the

mono extension and the spacer tower.