Gardeo GTHT2575LC Original Instructions Manual page 60

The declared vibration total value has been measured in accordance with a standard test
method and may be used for comparing one tool with another that the declared vibration total value may
also be used in a preliminary assessment of exposure.
A warning that the vibration emission during actual use of the power tool can differ from the
declared total value depending on the ways in which the tool is used and of the need to identify safety
measures to protect the operator that are based on an estimation of exposure in the actual conditions of
use (taking account of all parts of the operating cycle such as the times when the tool is switched off and
when it is running idle in addition to the trigger time).
GUARANTEE
Refer to the enclosed guarantee conditions for the terms and conditions of guarantee.
AFTER SALES SERVICE
A damaged switch must be replaced in our after-sales service shops.
Repairs and work carried out on the device are only allowed by authorized specialist personnel!
Contact your dealer.
Warning ! Non-conforming procedures void all warranty.
Improper repairs can lead to considerable danger for the user!
In order to improve its capabilities, this unit may be subject to design or construction changes without notice.
AFTER-SALES SERVICE AND APPLICATION SERVICE
Our after-sales service responds to your questions concerning maintenance and repair of your product as well as
spare parts. Exploded views and information on spare parts can also be found
GARDEO application service team will gladly answer questions concerning our products and their accessories :
sav@eco-repa.com
under:www.eco-repa.com
81, rue de gozée
6110 Montigny-le-Tilleul
Tél : 0032 (0) 71 29 70 70
Fax : 0032 (0) 71 29 86
GARDEO
Belgique
2017